Description

MOLYSLIP COPASLIP is a high performance anti-seize compound specifically formulated to protect fasteners from seizure induced by extremes of temperature, pressure and corrosion. The semi- synthetic base fluid is reinforced with anti-oxidants, corrosion inhibitors and ultra-pure copper particles to provide outstanding protection to threads and components.

MOLYSLIP COPASLIP minimises variations in frictional interference between threads allowing accurate, consistent assembly. It also prevents galling and seizure during assembly and dismantling – even after long periods of exposure to high temperatures, corrosive environments or high pressure.

Features and benefits

• Ensures consistent friction between threads
• Protects against galling and seizure
• Protects against rust and corrosion
• Eases assembly of the tight tolerance components
• Withstands extreme temperature

Instructions for use

MOLYSLIP COPASLIP should be used as supplied. Ensure surfaces to be treated are clean and dry

– free from oil, grease or dirt contamination. Apply a thin even coating the surface by brush or with a lint free cloth. Refer to the product safety data sheet for guidance on safe handling, storage and disposal.

Storage

MOLYSLIP COPASLIP should be stored in original, unopened packaging, out of direct sunlight at temperatures between 5°C and 35°C. The most up to date shelf life information for Molyslip products can be found on the certificate of analysis issued at the time of manufacture.

Packaging and product code

 

Code	Pack
M113001	100g tube
M119005	500g tin
M113020	20kg pail
M113050	5kg pail
M113090	200kg drum

 

Technical data

 

Property	Test method	Result
Appearance	–	Smooth copper paste
Consistency	IP50	NLGI 2
Base oil viscosity	–	100 cSt
Drop point	IP396	>300°C
Flash point	IP34	>200°C
Effective temperature range	–	-40°C up to +1100°C
Coefficient of friction (steel on steel, steady state)		0.12

Note: these values are typical only and do not constitute a specification